WIKA CPH6400 - 1 General Information 4 GB

4 WIKA operating instructions, model CPH6400
11313439.04 12/2012 GB/D
GB
1. General information
1. General information
■
The precision hand-held pressure indicator described in the operating instructions has
been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the precision
hand-held pressure indicator. Working safely requires that all safety instructions and
work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regula-
tions for the precision hand-held pressure indicator’s range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the precision hand-held pressure indicator and readily accessible to skilled
personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions,
prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insuciently qualied skilled personnel or unauthorised modications to
the precision hand-held pressure indicator.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modications.
■
Factory calibrations/DKD/DAkkS calibrations are carried out in accordance with inter-
national standards.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: CT 14.01
- Application consultant:
Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-8767
E-mail: testequip@wika.de