WIKA T32.1S - Page 18

GB
11258421.0901/2012GB/D
18 WIKAoperatinginstructionstemperaturetransmitterT32.xS
6. Commissioning, operation
Mounting example:
3173801.A
6.2 Mounting
6.2.1 Transmitter in head mounting version (model T32.1S)
Thetransmittersforheadmounting(modelT32.1S)aredesignedto
bemountedonameasuringinsertwithinaFormB,DINconnection
head,withextendedmountingspace.Theconnectionwiresofthe
measuringinsertmustbeapprox.50mmlongandinsulated.
ForapplicationswithhigherEMCrequirements,itisrecommended
usingashieldedcablebetweenthetemperaturetransmitterandthe
sensor,especiallyinconnectionwithlongleadstothesensor.Foran
exemplaryillustration,seedrawing
grounded
groundedshield
sensorwire
equipotentialbonding
T32.xS
Field housing/
switch cabinet
Forthermocouples,additionallygroundhere!
sensor
ForgroundingofthemodelT32.xS
temperaturetransmitterseesafety
instructionspage9f.