Monthly Maintenance
• Check safety locks to insure they are in good operating condition.
• Check all cables for excessive signs of wear
• Make a visual inspection of all moving parts and check for excessive signs of
wear
• Replace all faulty parts before lift is put back into operation.
WARNING!
• Never exceed the rated capacity of lift.
• Do not use lift if any component is found to be defective or worn.
• Never operate lift with any person or equipment below. Always stand clear of lift
when lowering or raising.
• Never operate lift with any person or equipment below.
• Always make sure safety locks are engaged before entering work area.
• Never leave lift in elevated condition unless all four safety locks are engaged.
To Next Page
Loading...