ASSEMBLY INSTRUCTIONS →
Step 1: Unpacking
Unpacking: Unpack the lift close to the installation site. Open parts box and carefully lay
out all your parts. Review your parts list to verify that you have all the parts.
Parts Box Models WF9000/WF9000XLT
Qty Description
1 Manual
2 Notched Nylon Slider-L (#28BL)
2 Notched Nylon Slider-R (#28BR)
12 Nylon Sliders (#28A)
8 Nylon Stops (#29)
4 Caster Pins (#46)
1 Caster Hair Pin & Washer (#47, 4 of each)
1 Runway Bolt Kit (#16-19, 8 of each)
1 Motor Mount Hex Nut Kit (#16-19)
1 Motor Bolt Kit (#7-10, 4 of each)
1 Hose Clamp
1 Pully Cover/Nylon Stop Hex Nut Kit (#16-19, 24 of each)
1 Rolling Jack Tray Hex Nut Kit (8 hex head fasters, 8 flat washers)
1 Rolling Jack Tray Lock kit (2 pieces)
3 Large Plastic Drip Trays
To Next Page
Loading...