10
3. Insert the connection tube to the rubber
outside the lid.
4. Insert the tube connector to the dispensing
spout milk frother inlet (open the inlet cover
rst).
NOTE: Clean the automatic milk froth system
before rst use.
BEFORE FIRST USE
• Press Hot Water button (see “Manual
Rinsing”) to clean inside of the coffee
machine before the rst use.
• Before using the machine for the rst time,
all removable parts making contact with
water or milk should be cleaned.
DAILY OPERATION
FILLING WATER TANK
When is ashing, the water tank is in low
water level and requires to be lled up.
1. Lift the water tank using the lid as handle.
2. Rinse the water tank with fresh water. Fill
the tank to the max level and place it back
into the machine. Make sure it is installed
properly.
Inlet cover
To Next Page
Loading...
