Wilfa VOLO - Other Settings

13
ENEN
PREPARING HOT WATER
1. Place a cup under the coffee spout.
2. Press Quick Clean/Hot Water twice.
The button lights indicating the appliance
is heating up water.
3. Preparation will stop automatically. If you
want to stop hot water during operation,
press the button again.
TURNING OFF THE MACHINE
Switch off the appliance by pressing the ON/
OFF button.
AUTOMATIC SHUT-OFF
The appliance is equipped with auto shut-off.
Depending on the mode you selected, the
appliance will have different auto shut-off times
(see “Mode Selection”).
CLEANING
Remember to clean the connection tube and
froth system, and empty and clean the drip tray
and coffee ground container after use.
Read the cleaning instructions further down
thoroughly.
OTHER SETTINGS
ADJUSTING COFFEE/HOT WATER
VOLUME
The machine can memorize your desired
volume of espresso, lungo, cappuccino, latte
macchiato, and hot water from 25ml to 250ml.
1. When making your coffee or dispensing
hot water, press and hold the button you
selected. The appliance will continue to
make the cup of coffee.
2. When the volume of coffee or hot water
meets your desired volume, release the
button. Two beep sounds indicate the
volume of coffee is being memorized.
GRINDING ADJUSTMENT
You can adjust the grinder to choose different
coffee grind levels by turning the knob in the
bean container. The dots indicate the neness
of grind. When the grinder is grinding the
coffee beans, you can turn the knob to change
the neness.
Recommended grinding level
Espresso 1-3
Lungo 3-5
Latte Macchiato 1-3
Cappuchino 3-5
WARNING: Never do the grinding adjustment
when the grinder is not operating. It may
damage the grinder.