9
INSTALLATION
1. Remove any protective lms, stickers and
other packing materials on the appliance.
2. Choose a safe and stable surface
with an easily reachable power
supply. Allow minimum distances
from the sides of machine.
3. Insert the external drip tray to the machine
until it is secured.
4. Fill the water tank with water (see ”lling
water tank”).
5. Fill the container with coffee beans
(see ”Filling bean container”
6. Unwind and straighten the power cord.
Insert the plug into socket located on the
back of machine, while the other end of
power cord to wall socket with correct
power voltage.
INSTALL THE MILK CONTAINER
1. Place the connection rubber into the slot
inside the lid.
2. Insert the container tube to the rubber
inside the lid.
To Next Page
Loading...
