EasyManua.ls Logo

Wilfa VOLO - Mode Selection

Wilfa VOLO
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
ENEN
MODE SELECTION
The machine has three different modes: default mode, ECO mode and speed mode.
In ECO mode, the appliance saves more energy. In speed mode, the user can make their coffee
faster than in default. Default is the standard mode.
PROGRAM HOW TO ILLUMI-
NATION
LIGHT
PRE-
BREWING*
AUTO
SHUT-OFF
TIME
CUP
VOLUME
MEMORY
Speed mode 1. When the machine is in
standby mode, press and
hold for 5 seconds.
2. Press espresso button to
select speed mode.
30
Default mode 1. When the machine is in
standby mode, press and
hold for 5 seconds.
2. Press Cappuchino button
to select default mode.
20
ECO mode 1. When the machine is in
standby mode, press and
hold for 5 seconds.
2. Press latte machiatto
button to select eco mode.
10
*The pre-brewing function moistens the
grounded coffee beans in the brewer with
small amount of water before full extraction.
This expands the coffee grounds to build
up a greater pressure in brewer which help
extraction of all the oils and full avor from the
grounded beans.
NOTE: With the speed mode, the coffee might
not be as warm as when you use default or eco
mode.
1. When the machine is in standby condition,
press and hold for 5 seconds.
2. Press Espresso button for speed mode,
Cappuccino button for default setting and
Latte Macchiato button for ECO mode. Two
Beep sounds indicates that the mode is
selected.
NOTE: If you are pressing irrelative Light in
each mode, the machine will not respond.
3. If you would like to remain the setting
unchanged, press again or wait for 5
seconds for the machine to return to stand-
by condition.

Table of Contents

Related product manuals