Wilo HELIX VE 1 Series - User Manual

Wilo-HELIX VE 1~
Pioneering for You
4 199 923-Ed.04/ 2021-11-Wilo
de Einbau- und Betriebsanleitung
en Installation and operating instructions
fr Notice de montage et de mise en service
nl Inbouw- en bedieningsvoorschriften
es Instrucciones de instalación y funcionamiento
it Istruzioni di montaggio, uso e manutenzione
pt Manual de Instalação e funcionamento
ru Инструкцияпомонтажуиэксплуатации
tr Montajvekullanmakılavuzu
uk
Iнструкція з монтажу та експлуатації

Wilo HELIX VE 1 Series Specifications

General

Brand	Wilo
Model	HELIX VE 1 Series
Category	Water Pump
Language	English

Summary

Safety

2.1 Indication of instructions

Explains symbols and signal words used to convey safety information.

2.2 Personnel qualifications

2.3 Danger in non-observance

Outlines risks associated with disregarding safety instructions.

2.4 Safety consciousness

Emphasizes compliance with safety instructions and regulations.

2.5 Safety instructions for operator

Provides specific safety guidance for the end-user operation.

2.6 Installation & maintenance safety

Outlines safety protocols for installation and maintenance personnel.

2.7 Unauthorized modification

2.8 Improper use

Transport and interim storage

Installation and electrical connection

7.1 Commissioning

7.2 Installation

Details general requirements and precautions for installing the pump.

7.3 Pipe connection

7.4 Electrical connections

Details the procedures and safety precautions for making electrical connections.

Running modes and diagrams

Commissioning

8.1 System priming and venting

Explains how to prime and vent the pump system before operation.

8.1.1 Venting process

8.1.2 Venting process - suction mode

8.2 Starting the pump

Provides instructions and safety warnings for starting the pump.

8.3 Commissioning

8.3.1 Configuration in MODE 1

8.3.2 Pressure regulation MODE 2

8.3.3 Configuration in MODE 3

Maintenance

Faults, causes and remedies