en
4 Installation and operating instructions • Isar BOOST5 • Ed.06/2024-05
1 Safety
1.1 About these instructions
These instructions form part of the product. Compliance with the
instructions is essential for correct handling and use:
• Read the instructions carefully before all activities.
• Keep the instructions in an accessible place at all times.
• Pass the instructions on to a subsequent owner.
• Observe all product specifications.
• Observe the markings on the product.
The language of the original operating instructions is German. All
other languages for these instructions are translations of the ori-
ginal operating instructions.
Failure to observe the instructions will result in danger to persons
or damage to property. The manufacturer is not liable for damage
caused by:
• Improper use.
• Incorrect operation.
1.2 Copyright
WILO SE © 2024
The reproduction, distribution and utilisation of this document in
addition to communication of its contents to others without ex-
press consent is prohibited. Offenders will be held liable for pay-
ment of damages. All rights reserved.
1.3 Subject to change
Wilo shall reserve the right to change the listed data without no-
tice and shall not be liable for technical inaccuracies and/or omis-
sions. The illustrations used may differ from the original and are
intended as an exemplary representation of the product.
1.4 Exclusion from warranty
and liability
Wilo shall specifically not assume any warranty or liability in the
following cases:
• Inadequate configuration due to inadequate or incorrect in-
structions by the operator or the client
• Non-compliance with these instructions
• Improper use
• Incorrect storage or transport
• Incorrect installation or dismantling
• Insufficient maintenance
• Unauthorised repairs
• Inadequate construction site
• Chemical, electrical or electrochemical influences
• Wear
1.5 Identification of safety
instructions
In these installation and operating instructions, safety instruc-
tions are displayed as follows:
To Next Page
Loading...
