en
Installation and operating instructions • Isar BOOST5 • Ed.06/2024-05 7
– Safety shoes
– Safety gloves for protection against cuts
• Locally applicable laws and regulations on work safety and ac-
cident prevention must be complied with.
• The procedure described in the installation and operating in-
structions for shutting down the product/unit must be strictly
observed.
• Only original parts from the manufacturer may be used for
maintenance and repairs. The use of any non-original parts re-
leases the manufacturer from any liability.
• Disconnect the device from the mains and secure it against be-
ing switched on again without authorisation.
• All rotating parts must be at a standstill.
• Close the gate valve in the inlet and in the pressure pipe.
• Store tools at the designated locations.
• After completing work, reattach all safety and monitoring
devices and check that they function properly.
2 Product description
2.1 Description
• Compact, quiet and high-performance pump system.
• Electrical system with intelligent and intuitive product control.
– The system pressure is kept constant by adjusting the pump speed according to us-
age.
– The product controls the hydraulic and electrical operating parameters and protects
against malfunctions.
To Next Page
Loading...
