Wilo Stratos-D Series - Scope of Delivery Contents; Optional Accessories

English
56 WILO SE 10/2013
Minimum inlet pressure (above atmospheric pressure) at the pump suction port
in order to avoid cavitation noises (at fluid temperature T
Med
):
The values apply up to 300 m above sea level; allowance for higher altitudes:
0.01 bar/100 m increase in height.
5.3 Scope of delivery
• Pump, complete
• Two gaskets for threaded connection
• Two-piece thermal insulation shell (single pump only, Fig. 1a, item 3)
• Material: EPP, polypropylene foam
• Thermal conductivity: 0.04 W/m as per DIN 52612
• Flammability: B2 class as per DIN 4102, FMVSS 302
• Eight M12 washers
(for M12 flange bolts for DN32-DN65 combination flanged version)
• Eight M16 washers
(for M16 flange bolts for DN32-DN65 combination flanged version)
• Installation and operating instructions
5.4 Accessoiries
Accessories must be ordered separately:
• IF Modules
• IR operating and service units (IR-Monitor/IR-Stick)
See catalogue for detailed list.
Nominal diameter
T
Med
T
Med
T
Med
-10°C...+50°C +95°C +110°C
Rp 1 0.3 bar 1.0 bar 1.6 bar
Rp 1¼ 0.3 bar 1.0 bar 1.6 bar
DN 32 0.3 bar 1.0 bar 1.6 bar
DN 40 (H
max
 10 m) 0.3 bar 1.0 bar 1.6 bar
DN 40 0.5 bar 1.2 bar 1.8 bar
DN 50 (H
max
 10 m) 0.3 bar 1.0 bar 1.6 bar
DN 50 0.5 bar 1.2 bar 1.8 bar
DN 65 (H
max
 9 m) 0.5 bar 1.2 bar 1.8 bar
DN 65 0.7 bar 1.5 bar 2.3 bar
DN 80 0.7 bar 1.5 bar 2.3 bar
DN 100 0.7 bar 1.5 bar 2.3 bar