What to do if my Wincor Nixdorf TH250 LED blinks three times, then stays on?
If the LED blinks three times and then stays on, the voltage is too high. Wait for the voltage to recover, or try a new power supply.
What to do if my Wincor Nixdorf Printer color print is light?
If the color print is light, this could be due to variations in the paper. Increase the energy level of the print-head in the “Color Density Adj” of the printer configuration menu.
What does it mean if the LED on my Wincor Nixdorf Printer blinks twice and then stays on?
If the LED blinks twice and then stays on, the voltage is low. Wait for the voltage to recover, or try a new power supply.
What to do if my Wincor Nixdorf TH250 Printer LED blinks four times, then stays on?
If the LED blinks four times and then stays on, the thermistor is out of range. Allow the print-head to cool down.
What does it mean if the LED on my Wincor Nixdorf Printer blinks once, then off?
If the LED blinks once and then remains off, it could be due to two reasons: * The knife is unable to home. Stop using the printer. * The paper is low. Load a new paper roll.
What does it mean if the LED on my Wincor Nixdorf TH250 Printer blinks twice, then off?
If the LED blinks twice and then remains off, the printer is undergoing flash programming. Allow the printer to finish programming.
General| Brand | Wincor Nixdorf |
|---|---|
| Model | TH250 |
| Category | Printer |
| Language | English |
To Next Page
