What to do if my Wincor Nixdorf TH250 LED blinks three times, then stays on?
If the LED blinks three times and then stays on, the voltage is too high. Wait for the voltage to recover, or try a new power supply.
What to do if my Wincor Nixdorf Printer color print is light?
If the color print is light, this could be due to variations in the paper. Increase the energy level of the print-head in the “Color Density Adj” of the printer configuration menu.
What does it mean if the LED on my Wincor Nixdorf Printer blinks twice and then stays on?
If the LED blinks twice and then stays on, the voltage is low. Wait for the voltage to recover, or try a new power supply.
What to do if my Wincor Nixdorf TH250 Printer LED blinks four times, then stays on?
If the LED blinks four times and then stays on, the thermistor is out of range. Allow the print-head to cool down.
What does it mean if the LED on my Wincor Nixdorf Printer blinks once, then off?
If the LED blinks once and then remains off, it could be due to two reasons: * The knife is unable to home. Stop using the printer. * The paper is low. Load a new paper roll.
What does it mean if the LED on my Wincor Nixdorf TH250 Printer blinks twice, then off?
If the LED blinks twice and then remains off, the printer is undergoing flash programming. Allow the printer to finish programming.
General| Brand | Wincor Nixdorf |
|---|---|
| Model | TH250 |
| Category | Printer |
| Language | English |
General safety advice including not touching hot parts and ESD sensitive components.
Precautions for installation, environment, power connection, and handling.
Explains the function of the paper feed button for paper advancement and menu access.
Describes the meaning of the green LED status light for printer operation.
Guidance on connecting the power supply cable, emphasizing safety.
Detailed steps to perform a diagnostic test printout for printer status.
Defines Ethernet terms and provides default setup instructions.
Details the default Ethernet configuration settings for the printer.
Step-by-step instructions for installing the printer on a Windows POSReady7 network.
Step-by-step instructions for installing the printer on a Windows XP/POSReady2009 network.
Details commands for configuring printer internal parameters for Ethernet operation.
To Next Page
