Windcave iPP350 - Response Codes

Page 22 of 27
7 Response Codes
ReCo Description
P4 PosDeviceId is greater than 32 characters
P5 PosDeviceId not matched
P7 Invalid transaction type
P8 Authentication error
P9 Authentication error—Station Id mismatch
PA Status request error
PB/PC SCRHIT Init Session Error
PC
Existing Txn In progress—previous transaction was left in an incomplete state, ensure sending status
request of the previous transaction and it’s reference and status response is handled accordingly.
PD/PE/PF
SCRHIT Transmit Error— network connection issue, ensure the terminal has performed a Logon to the
Windcave HOST.
PG Init Wait Timeout
PJ TxnRef not matched
PK SCRHIT not enabled
PL Invalid input parameter
PM Txn type not allowed
PO Invalid Station Id
TQ HIT Start Failed— connection lost, ensure the terminal has performed a Logon to the Windcave HOST.