Page 9 of 27
3.3 IPP350 with MTM300
The iPP350 can be connected directly to the MTM300. The MTM300 includes a thermal printer and allows both Pay-
mark and Windcave key schemes to be used. The MTM300/iPP350 connection requires two separate cables:
All printing is handled by the MTM300’s on-board thermal printer.
3.4 3G Connection with Move5000
The Move5000 accepts SIM cards which allows it to communicate using 3G. No cable connection is required other
than the standard power cable to the base.
Only Windcave keys can be used with this set up.
All printing is handled by the on-board thermal printer
To Next Page
Loading...
