16
Operations
Filling The Solution Tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spills from top of solution tank.
Use only the suitable chemicals listed below. Using
incompatible chemicals will damage the machine.
Damages of this type are not covered under warranty.
Carefully read ingredients on manufacturer's label
before using any product in this machine.
ADD CLEANING
CHEMICAL PER
CHEMICAL LABELING
STEP 3
REPLACE SOLUTION
FILL COVER
STEP 4
REMOVE SOLUTION
FILL COVER
STEP 1
OR
ADD WATER
10 Gal.
(38 Lt)
STEP 2
140°F (60°C)
86302100 CLIPPER DUO
CHEMICALS
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
To Next Page
Loading...
Need help?
General
