Windsor 10080480 - Pre Run Setup

17
Operations
Pre Run Setup
Remove electrical cord and literature from recovery
tank. Fill solution tank (see filling instructions).
Plug cord into grounded outlet. NOTE: Be sure dome
is seated on recovery tank, and float shut-off is installed
correctly.
Switch the cleaning mode switch to the desired
process.
A for the encapsulating Interim Carpet Cleaning
Process.
B for Deep Extraction.
Adjust handle to comfortable operating position. Tip
machine back by main handle to move to starting point.
STEP 2
STEP 3
STEP 4
STEP 1
86302100 CLIPPER DUO