Windsor Clipper Duo - Pre Run Setup

18
Operations
Pre Run Setup
Remove electrical cord and literature from recovery
tank. Fill solution tank (see filling instructions).
Plug cord into grounded outlet. NOTE: Be sure dome
is seated on recovery tank, and float shut-off is installed
correctly.
Switch the cleaning mode switch to the desired
process.
Press the top of the switch for the encapsulating Interim
Carpet Cleaning Process.
Press the bottom of the switch for Deep Extraction.
Adjust handle to comfortable operating position. Tip
machine back by main handle to move to starting point.
STEP 1
STEP 2
STEP 3
STEP 4
86408790 Operator’s Manual - Clipper Duo