Windsor Clipper Duo - Using The Hand Tool

23
Operations
Using The Hand Tool
1. Use only acceptable accessory tools. See Optional
Accessories section.
To connect solution hose pull back collar and insert
over machine mounted fitting, then release collar to
lock into place. Solution connection can remain
connected at all times.
Disconnect vacuum hose and connect the hand
tool to hand tool connection as shown.
2. Select hand tool switch.
3. Squeeze handle on accessory tool to begin
cleaning.
SOLUTION QUICK
DISCONNECT
HAND TOOL
CONNECTION
HAND TOOL SWITCH
86408790 Operator’s Manual - Clipper Duo