To Next Page

To Previous Page

Operations

Operating The Machine

1. This machine can be operated in either direction.

For smaller areas operate the machine by pulling

rearward.

For larger unobstructed areas, flip the handle and

use the machine's brush assisted propelling

motion.

2. Start at wall closest to power outlet. For small

areas, pull straight back without pushing down on

handle.

3. Release intermittent PRESS trigger switches or

turn off continuous AUTO setting on solution switch

approximately 1 foot before ending cleaning pass.

4. Push down on handle to raise vacuum shoe and

brush before moving to the next cleaning pass.

Overlap brush contact area approximately 1 inch.

1 in.

(25mm)

STEP 4

STEP 2

1 ft.

(30 cm)

STEP 3

STEP 1

86408790 Operator’s Manual - Clipper Duo

Windsor Clipper Duo User Manual

Questions and Answers: