EasyManuals Logo
Home>Windsor>Scrubber>CS26

Windsor CS26 Operating Instructions

Windsor CS26
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Operations
Scrub Controls
1. Function Mode Dial
The first two positions are for transport only. See drive controls section.
Daytime cleaning / light cleaning
This mode is used for light cleaning. In this mode the machine will propel at a maximum of
medium speed. The scrub deck will automatically lower to a lower down pressure setting. The
water will flow at a low rate. Water will automatically shut off in neutral and restart when
pressure resumes. The squeegee will automatically lower and vacuum will flow at a slow rate.
(Squeegee will continue to lower and the vacuum will continue to run in neutral. The
squeegee will raise in reverse.)
Daytime Plus cleaning / light cleaning
This mode is used for light cleaning. In this mode the machine will propel at a maximum of
medium speed. The scrub deck will automatically lower to a lower down pressure setting. The
water will flow at a low rate. Water will automatically shut off in neutral and restart when
pressure resumes. The squeegee will automatically lower and vacuum will flow at a medium
rate.
Medium scrub level cleaning
This mode is used for medium level cleaning. In this mode the machine will propel at a
maximum of medium. The scrub deck will lower at a medium down pressure. The water will
flow at a medium rate. The vacuum will flow at a medium rate.
1
2
86395370 Operator Manual - Chariot 3 iScrub 26

Other manuals for Windsor CS26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor CS26 and is the answer not in the manual?

Windsor CS26 Specifications

General IconGeneral
BrandWindsor
ModelCS26
CategoryScrubber
LanguageEnglish

Related product manuals