EasyManuals Logo
Home>Windsor>Scrubber>CS26

Windsor CS26 User Manual

Windsor CS26
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
27
Maintenance
Service Schedule
MAINTENANCE
BEFORE EACH
WORK PERIOD
AFTER EACH
WORK PERIOD
50
HRS
100
HRS
200
HRS
Check water level of batteries after charging; add
distilled water if necessary. (Wet cell only)
*
Check that recovery lid seals tightly. *
Visually check for damaged or worn wheels. *
Check brushes or pads for proper installation. *
Check vacuum hose connections. *
Check that squeegee is securely attached. *
Check for securely attached drain hoses, plug and cap. *
Check pedal, brake and steering for proper operation. *
Clean out recovery tank and debris bin. *
Clean and inspect float shutoff. *
Clean out solution tank. *
Clean and inspect solution filter strainer. *
Run vacuum motors to dry. *
Clean brushes or pads and check wear. *
Clean squeegee blades and check wear. *
Clean outside of tanks, check for damage. *
Store with recovery lid propped open. *
Charge batteries if needed. *
Flush chemical system (if equipped). *
Clean off top of batteries. *
Check battery cells with hydrometer. (Wet cell only) *
Inspect scrub deck skirts and Aqua-Mizers. *
Check battery connections are tight. *
Clean battery cases and battery compartment. *
Check parking brake. *
Clean cables and pulleys for squeegee lift. *
Clean pivot points on squeegee and scrub deck. *
Check all motors for carbon brush wear. *
Check motor commutators. *
Check steering chain tension. *
Check chemical pump peristaltic tube *
86367610 Chariot CS26

Other manuals for Windsor CS26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor CS26 and is the answer not in the manual?

Windsor CS26 Specifications

General IconGeneral
BrandWindsor
ModelCS26
CategoryScrubber
LanguageEnglish

Related product manuals