Winegard SK-SWM3 User Manual

Slide data cable connection through hole in base
and secure in place using the retaining nut from
“Removing the Turret” section step 3.
Reconnect data cable and reinstall cable cover,
secure cover with 4 screws.
Reconnect coax cables at base and sheath
cable to vertical ports. Sheath cable should be
connected in order shown in picture.
With the wrap cable replaced you can now plug the interface box into power
and operate the antenna as desired.
3
4
5

Winegard SK-SWM3 Specifications

General

Brand	Winegard
Model	SK-SWM3
Category	TV Antenna
Language	English