AN-301 SOS Button User Manual
12
3M double-sided adhesive tape can be used for installation on metal objects,
glass walls and non-perforating conditions.
1) Wipe the installation site with a dry towel to remove surface dust;
2) Glue 3M double-sided adhesive tape to the back plate of equipment installation;
3) The equipment holder is corresponding to the installation of the back card, and the
device is tightened;
4) Glue 3M double-sided adhesive tape to the installation position and press it several
times. After the device is fixed, the installation is completed. Recommended
installation height ≥1.5 meters
5. Configuration
5.1 Tool list
Note: For configuration, you can use wireless configuration tool (wireless
configuration) or USB to TTL cable (cable configuration), but here we choose to tell
customer how to do wireless configuration.
The laptop communicates with device via
wireless configuration tool ireless
configuration tool(wireless configuration),
you should install CP210x driver for this
tool
To Next Page
Loading...