17
③ To remove the buckle, gently lever up one side
first, then take off the buckle.
④ Lever Searchlight’s bottom up , and push it A
out of the buckle .B
A
B
● Propeller Guard
① install on the left side of the aircraft.
install on the right side of the aircraft.
② Clasp the Prop Guard on the arms of the aircraft
firmly.
③ Same way to install both of the Prop Guard. ④ Make sure the Prop Guard is installed firmly
before takeoff.
S6 User Manual
● Searchlight
① Slide the Searchlight into the buckle.
② Clasp the buckle on one side first, then push
the buckle down to lock it on both side.
You can change different level of brightness and flash modes through the APP.
Searchlight Installation:
For a safe flight please install the Propeller Guard:
To Next Page
Loading...
