4
Pre paring the A ircra f t
Unfold the 4 folding arms to its maximum position. Extend the 4 pairs of propellers
into ready-to-fly position. After the flight, please fold the arms and the propellers
and put the aircraft into the carrying box.
The S6 flight LiPo battery has a capacity of 1400mAh, a voltage of 7.6V, and with
charge / discharge functionality, the max flight time is 10 mins.
Unscrew the covers on the motors and install new propellers with the same direction
of rotation according to the or symbol. Then screw the covers back on the motors
firmly.
Propeller
Flight Battery
Changing the Propellers
Fold the propellers
Extend the Arm
The old version propellers need to be extended into ready-to-fly position when takeoff.
The new version can be spread off automatically by the centrifugal force when takeoff.
The new and old version of propellers cannot be mix-using.
Clockwise Anti-clockwise
Installation diagram
Recommend: Please twist screws of the motors tightly every after 5 hours flight time.
Power the battery by using the S6 specialized charging base: Connect to a suitable
power source or a portable power bank. A red solid LED indicates the battery is
charging. A green solid LED indicates the battery is fully charged. Disconnect the
charger and the battery when fully charged.
S6 User Manual
To Next Page
Loading...
