Winix C555 - Filter Replacement and Reset; Installing New Filters Correctly; Resetting the Filter Indicator Light

English
15
C555C555
①
After replacing the filters, turn the
power onto the unit and then use
a thin object, such as a paper clip,
to press the RESET switch for 5
seconds.
소피아 2 영문
소피아 1
AOC
TM
Carbon filter
① Insert the Anti-microbial True HEPA filter first, then the AOC
TM
Carbon filter.
② Insert the Pre-filter.
• Insert bottom tabs of the Pre-filter into the slots on either side of the lower
part of the unit, then rotate upward to insert the upper tabs into the slots at
the top part of the unit until sides audibly click into place.
③
Replace the front panel by first inserting the latch at the bottom
edge into the base of the unit, then rotate the panel upward toward
the top of the unit until the magnets pull the lid closed.
▶
Anti-
microbial
True
HEPA
filter
Latch
▶
Pre-filter
Tabs
4. Replacing Filters
5. Resetting The Unit
FILTER CARE