•
During the first 4 minutes of power up, the Air Quality
Indicator will flash as the Smart Sensor measure the air quality
in the environment, after which normal operation will begin.
•
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
When the unit is running, you may hear a chirping or
buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 13.
INITIAL OPERATION
① Insert the power cord into an electrical
outlet.
② Press the ‘Power’ button.
③
By default, when the unit first powers
on, the mode will be set to Auto with
PlasmaWave
®
enabled.
•
When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
•
PlasmaWave
®
works to remove harmful
airborne contaminants.
To Next Page
Loading...
