•
When Manual Mode is selected, Auto and Sleep Modes are
automatically disabled.
MANUAL & PLASMAWAVE
®
3.
Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High, or
Turbo.
①
Press the Mode button to set the
desired fan speed.
•
When the button is pressed the unit
will cycle through Auto Mode, Sleep
Mode and fan speeds (Low, Medium,
High, Turbo).
4.
PlasmaWave
®
By default, PlasmaWave
®
is enabled whenever the unit is powered on.
①
When the unit is on, press and hold
the Mode button for at least 3 seconds
to enable or disable this feature.
•
When PlasmaWave
®
is enabled the
indicator light will be on. When it is
disabled the light will be off.
•
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
When the unit is running, you may hear a chirping or
buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure.
3
seconds
To Next Page
Loading...
Need help?
General
