CONTROLS
Air Outlet Vent
Air Quality Indicator
Color-coded LED indicates
one of three levels of air
quality.
Mode Button
-
Press to cycle through manual fan speeds (Low, Medium, High, Turbo).
-
Pressing will also cycle through Auto and Sleep Modes.
-
When sleep mode is selected the Air Quality Indicator light will be turned off.
-
Press and hold for at least 3 seconds to enable or disable PlasmaWave
®
.
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Wi-Fi Indicator
Indicates whether Winix
Smart feature is enabled or
disabled.
PlasmaWave
®
Indicator
Indicates whether
PlasmaWave
®
is enabled or
disabled.
Light Sensor
Detects the
amount of
ambient light
within the
environment,
to adjust the
brightness
of the LED
indicators.
Power Button
Turns the unit
on or off.
Change Filter Indicator
LED light indicates when it is time to
change the filter.
Wi-Fi Button
Enables or disables
the Wi-Fi feature.
To Next Page
Loading...
Need help?
General
