Winix ZERO 5 User Manual

USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 15
4. After replacing the lters, power on the unit. Once
the unit running, press and hold the RESET but-
ton for 5 seconds.
Cleaning the Pre-lter
Intervals between lter cleanings may vary depending on the air quality.
1. Use a vacuum cleaner or soft brush to clean the
Pre-lter. If it is excessively dirty, wash with room
temperature water.
• Use only water, do not use volatile substances
such as alcohol or acetone.
• If the pre-lter becomes damaged or in any way needs replacement: Please contact your local dealer
NOTICE :
• Do not use benzene, alcohol, or other volatile uids, which may cause damage or discoloration.
• The Pre-lter is reusable after cleaning, ensuring it has completely dried.
• Do not use hot water over 104°F or volatile uids such as paint thinner.
• After washing the pre-lter, allow it to dry completely in a wellventilated area. Otherwise, it may develop a
bad odor.

Winix ZERO 5 Specifications

General

PlasmaWave Technology	Yes
Auto Mode	Yes
Sleep Mode	Yes
Weight	7.3 kg
Warranty	2 years
Room Size	Up to 99 m²
Pre-filter	Yes
Activated Carbon Filter	Yes
Air Quality Sensor	Yes
Fan Speeds	4
Power Consumption	70W
Room Coverage	360 sq. ft.
Filter Life	HEPA Filter: 12 months, Activated Carbon Filter: 12 months
HEPA Filter	Yes (99.97% efficiency at 0.3 microns)