EasyManua.ls Logo

Winix ZERO 5 - INSTALLING AIR PURIFIER FILTERS

Winix ZERO 5
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 6
This product comes with all of the required lters. The protective plastic wrap must be removed from the lters before
use.
Operating the unit without removing the plastic wrap may result in product failure.
Unplug and make sure the unit is turned o󰀨 before installing lters.
The unit will automatically power o󰀨 when front panel is opened.
1. Remove the front panel by grasping its upper
edge and gently pulling forward.
To remove the front panel, the latch at the lower
edge of the panel must be released from its po-
sition.
2. Remove the lters from the unit, they are protect-
ed inside a plastic wrap.
3. Remove lters from protective plastic wrap.
Operating the unit without removing lters from
plastic may cause abnormal noise, deformation,
or re as a result of overheating.
NOTE : Refer to pages 13 - 16 for detailed information on lter care and how to replace them.
INSTALLING FILTERS

Related product manuals