Winterhalter CTR Series - CONNECTED WASH; Water back-flow counter

English | 4 | Software
24 | 89014478; 2020-06 | Operating instructions CTR Series
4.1.11 CONNECTED WASH
In this menu the link with CONNECTED WASH is configured.
Activating CONNECTED WASH
You will find detailed information and instructions on the following website:
http://www.connected-wash.biz/start/de/
4.1.12 Water back-flow counter
The water back-flow counter must be reset if the set total capacity of an external water treatment device has reached the
value “0”.
1 2
Item Name
1 Set the total capacity
2 Reset the water back-flow counter