Winterhalter CTR Series - Timer

English | 4 | Software
20 | 89014478; 2020-06 | Operating instructions CTR Series
4.1.4 Timer
The timer can programme the warewasher to switch on or off automatically at a specific time.
At the time of automatic start-up the following requirements must be met:
– The door is closed.
– The on-site mains isolation switch is switched on.
– The on-site water supply is open.
1 2
Item Name
1 Regularly
2 Non-recurring date
Programme a regular time
1
234
Item Name
1 Switch the timer off / on
2 Time for automatic switch-off
3 Time for automatic start-up
4 Select time schedule
– Daily
– Mon-Fri, Sat-Sun
– Individual (a different time on every weekday)
Programme a non-recurring date
1 42 3
Item Name
1 Switch the timer off / on
2 Date and time for automatic start-up
3 Date and time for automatic switch-off
4 Date and time