English | 6 | Operation
32 | 89014478; 2020-06 | Operating instructions CTR Series
6 Operation
6.1 Switch on the warewasher
The warewasher is ready for operation as soon as the start button lights up green.
6.2 Washing
Caution
Risk of scalding from hot wash water
There is hot wash water in the interior of the warewasher after it is switched on.
Ø Do not open the door during the washing process.
Ø Do not reach through the curtains into the warewasher during the washing process.
Ø Before opening the door, terminate the washing process by pressing the start button and waiting a few
seconds.
Warning
Risk of injury when loading the wash racks
Ø Be aware of sharp and pointed utensils when loading the wash racks.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays and objects covered with wax.
– Only wash heat- and caustic-resistant plastic parts.
– Wash parts made of aluminium, e.g., pots, containers or trays, only with a specially suitable detergent to avoid black
discolorations.
– Only wash containers with maximum dimensions of 530 x 325 mm.
Arranging the wash items in the wash rack
Ø Remove large leftovers.
Ø Pour out beverage residues (outside the warewasher).
Ø Place plates and trays with their upper surface facing forwards.
Ø Place glasses, cups, bowls and pots rim down.
Ø Wash cutlery preferably standing in the cutlery holder or lying in a shallow wash rack. Always arrange the end of
handles downwards. Make sure that the cutlery is well spaced.
To Next Page
Loading...
