Operation | 6 | English
Operating instructions PT Series | 89014547; 2021-03 | 35
6 Operation
6.1 Switch on the warewasher
The warewasher is ready for operation as soon as the start button lights up green.
6.2 Washing
Caution
Risk of scalding from hot wash water
There is hot wash water in the interior of the warewasher after it is switched on.
Ø Do not open the hood during washing.
Ø Before opening the hood, terminate the washing programme by pressing the start button and waiting a
few seconds.
Warning
Possible risk of injury when loading the wash racks
Be aware of sharp and pointed utensils when loading the wash racks.
Ø Wash cutlery upright in the cutlery holder or laid in the flat basket.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays and objects covered with wax.
– Only wash heat- and caustic-resistant plastic parts.
– Wash parts made of aluminium, e.g., pots, GN containers or trays, only with a specially suitable detergent to avoid
black discolourations.
Arranging the wash items in the wash rack
Ø Remove large leftovers.
Ø Pour out beverage residues (outside the warewasher).
Ø Place plates with their upper surface facing forwards.
Ø Place glasses, cups, bowls and pots rim down.
Ø Wash cutlery preferably standing in the cutlery holder or lying in a shallow wash rack. Always arrange the end of
handles downwards. Make sure that the cutlery is well-spaced.
Ø Do not overload racks, to allow the wash water to reach all dirty surfaces.
Ø Space the glasses to prevent them from rubbing against each other. This will avoid scratches.
Ø For tall glasses, choose a wash rack with appropriate divisions so that the glasses are held in a stable position.
To Next Page
