English | 6 | Operation
38 | 89014547; 2021-03 | Operating instructions PT Series
Wash breaks
Do not switch the warewasher off during wash breaks.
Warewasher without an automatic hood mechanism:
Ø Close the hood to the bottom detent position to prevent the machine from cooling down.
Warewashers with an automatic hood mechanism:
There are two options for closing the hood without having to start a programme:
Ø Press the start button (1) on the front cover for 2 seconds.
Ø Press the “Close the hood” button.
Instructions for a good wash result
– Rinse the cutlery until it is washed. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery and dishes. Germs and bacteria exist even in fresh multi-purpose cloths.
To Next Page
Loading...
