WT901BLECL BLE5.0 | manual v0707 | http://wiki.wit-motion.com/english
2 Use Instructions with PC
2.1 PC Connection
PC software is only compatible with Windows system.
Link to download software
Instructions Video link
2.1.1 Serial Connection
Step 1. Connect the sensor with a data cable
Step 2. Install the driver- CH340
Download Link
Step 3. Confirm the com port in device manager
Step 4. Open the software(Minimu.exe)
Data will appear after auto-search finishes
Notice: If not successful, please operate manually
Choose the com port and baud rate 115200, data will be shown on the software.
To Next Page
Loading...
