Time function
Alarm function
The base unit allows you to set two different alarm times. For example, you can set an alarm for the
morning and for after an afternoon nap by activating both alarm times.
1. Use the
ALARM
button to select the desired alarm time (A1 or A2).
2. Hold and press the
ALARM
button for approx. 2 seconds once you have chosen the desired alarm time.
The hour indicator of the alarm time (A1 or A2) will flash.
3. Set the desired hour for the alarm with the
UP
and
DOWN
buttons.
4. Press
ALARM
to store the setting. The minute indicator will flash on the display.
5. Set the desired minute for the alarm with
UP
and
DOWN
buttons.
6. Press
ALARM
to store the setting. The alarm time is set and activated.
Switching the alarm on and off
Use the
ALARM
button to switch the alarm 1 or alarm 2.
Use the
UP
button to switch the alarm on and off.
To Next Page
Loading...
