WMF 1500S - Cup Volume, Multiple Brewing, and Dispensing Option

38
User Manual WMF1500 S
Software | Beverages
Cup volume, multiple brewing,
anddispensingoption
Cup volume
Set the desired cup volume. The recipe is adjusted
accordingly.
100 % indicates the previously saved value.
Cup volume S-M-L
The recipes for the sizes Sand Lare generated.
Mis as set.
Default value:
S= 25 % less than the setting.
L = 25 % more than the setting.
The S-M-L function can be activated in the operating
options. The cup volume can also be set to adifferent
general level for all beverages using the operating
options.
For individual beverages that deviate from the
standard, the S-M-L amounts can be changed under
Cup volume.
Each size can also be individually set to active or
inactive. Inactive means that the size no longer appears
as aselection for the individual beverage.
?
%
S-active Active L-active
S M L
72
73
74
75
76
77
78
97
98
99
100
101
102
103
122
123
124
125
126
127
128
10
* 11
* 12
* 1
* 2
* 3
* 4
DI_03_05_02_00
Change S-M-L for individual
beverages
w Cup volume
Activate S-M-L and make achange
for all beverages
w Operating options
w S-M-L
page 45
Multiple brewing cycles
The beverage is brewed several times, as set. Up to 12times
the set amount can be dispensed with one push of abutton.
Available for beverages with coffee and with milk mixtures,
aswell as for hot water with the “metered” dispensing option.
Dispensing option
• Start-Stop
The dispensing runs until the set amount is reached. The
dispensing can be stopped sooner by pressing the button
again.
• Metered
The set volume is dispensed. The dispensing option is
available for milk, foam, and for hot water.