WMF 1500S - Manual Cleaning

74
User Manual WMF1500 S
Care | Manual cleaning
Rinsing
Rinsing starts.
This part of the routine takes approx. 30minutes.
 Empty collection container
 Empty and dry the water tank
 Thread in the sealing plug again
(use aflat screwdriver; see illustration 1and2)
 Insert the water tank
 Replace the collection container
 Turn on main water supply tap
Subsequent rinses are from the mains supply.
The descaling is complete.
Completion is indicated on the display.
6.5 Manual cleaning
6.5.1 Clean the operating panel (CleanLock)
Touch “CleanLock” to start a15-second countdown.
The touch display can now be cleaned. The touch
display is activated again 15seconds after the last time
it was touched.
Scalding hazard
• If abeverage is initiated accidentally, there
is ahazard of being injured.
> Always lock out the touch display with
“CleanLock” before cleaning.
• There is arisk of causing scratches or scores.
> Do not clean with scouring powders or the
like.
> Do not use any sharp cleaners or
implements.
> Use soft cloths for cleaning.
Order numbers for the WMFcare
program
w Accessories and spare parts
page 102
CAUTION
Follow the Safety chapter
w starting on page 4
IMPORTANT
Observe the Warranty chapter
w starting on page 99