WMF 1500S - Page 93

93
User Manual WMF1500 S
Messages and instructions
Error pattern Action instructions
• Milk foam not OK
• Temperature too cold or
too hot
Basic Milk
 Change milk nozzle
Use asuitable milk nozzle on the combi spout.
Milk nozzle 3kW
• very cold milk (up to 46.4°F/8°C) green
• chilled milk
(46.4°F to 60.8°F/8to 16°C)
white
• uncooled milk
(above 60.8°F/16°C)
caramel
 Clean the combi spout
w Care w Clean milk system manually, page 79
If error not remedied
 Use another milk nozzle from the accessories
• Milk foam not OK
• Temperature too cold or
too hot
EasyMilk/DynamicMilk
 Check whether the milk temperature is the
same as the set temperature
• The milk foam dispensing
spits strongly
• Milk too hot
 Check whether the milk system has been
cleaned
 Clean the milk system
w Care w Milk system cleaning overview, page 68
 Check whether the milk has been cooled
sufficiently
• No powder beverage
dispensing
 Clean the mixer bowl
 Is the hose kinked?
 Perform milk cleaning and rinsing oftener, if
necessary daily
w Care w Cleaning intervals overview, page 63
w Care w Clean milk system manually, page 79
 Dose less powder
 Dose more water