4.7 Current supply
Switch the 24/30 V circuits on and off from the mains.
4.8 Backup battery
During the test the battery is short-circuited. This
procedure shortens battery life.
4.9 Display illumination
The display illumination can be switched off for testing.
4.10 Grounds container
Display if the micro switches switch the 24 V circuits of the
grounds container.
4.11 Fan
Test of function and current consumption
4.12 Power status
Report “power failure” to the control unit
4.13 Submenu choc dispenser / topping
Test choc valve
Test the portioner, the choc valve is also addressed
Test mixer motor
To Next Page
Loading...
