EasyManua.ls Logo

WMF Basic - Warnings and Safety Precautions; Electrical Equipment Safety; Safety Device Tampering Warning; Hot Surface Hazard

WMF Basic
53 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In your own interest, please follow all cautionary and safety instructions. This will help to avoid
accidents and technical malfunctions.
Never entrust the machine to anyone who is not familiar with the operating instructions.
Keep these operating instructions near the machine. This will allow your operating personnel easy access to
information at any time, and will enable them to take the appropriate action should any technical
malfunctions occur.
1. WARNINGS
Maximum machine safety is an integral WMF product characteristic to which we pay particular attention.
In spite of all our safety precautions, however, every machine is potentially hazardous if not operated properly.
This is why for your own safety we have summarised the warnings below.
Please also follow the safety instructions!
For your own safety,
please observe the following instructions
at all times:
Maintenance and repairs to electrical equipment
and connecting leads should only be carried out by
a specialist workshop or similarly qualified
individual.
The integral safety devices should in no
circumstances be “repaired”, bypassed or altered by
non-specialists. Tampering with the machine can
create serious hazards for the user.
Caution: risk of burns and scalds from hot surfaces
and in the dispensing area.

Related product manuals