To Next PageTo Next Page
Need help?Do you have a question about the Wolf CGS-24/200 and is the answer not in the manual?
Guidance on qualified service, original parts, and contractor recommendations.
Inspect burner gasket for wear and condition; lubricate as needed.
Examine insulation components for damage and replace if necessary.
Reassembly instructions for boiler components after maintenance.
Procedures for cleaning, refilling, and checking the siphon's seal.
Model-specific checks for sacrificial anode and trap cover removal.
Performing ventilation and flue gas tests for operational verification.
Adjust CO₂ levels for optimal combustion at full boiler load.
Adjust CO₂ levels for optimal combustion at low boiler load.
Verify CO₂ levels with the boiler casing closed after adjustments.
Guidance on qualified service, original parts, and contractor recommendations.
Inspect burner gasket for wear and condition; lubricate as needed.
Examine insulation components for damage and replace if necessary.
Reassembly instructions for boiler components after maintenance.
Procedures for cleaning, refilling, and checking the siphon's seal.
Model-specific checks for sacrificial anode and trap cover removal.
Performing ventilation and flue gas tests for operational verification.
Adjust CO₂ levels for optimal combustion at full boiler load.
Adjust CO₂ levels for optimal combustion at low boiler load.
Verify CO₂ levels with the boiler casing closed after adjustments.
General| Max. nominal heat output 80/60 °C | 24 kW |
|---|---|
| DHW Output | 24 kW |
| Efficiency at 80/60 °C | 98% |
| Dimensions (Width) | 440 mm |
| Weight | 37 kg |
| Max Operating Pressure | 3 bar |
| Fuel Type | Natural Gas |
| Type | Condensing gas boiler |
| Gas connection | G 3/4 |
| DHW connection | 15 mm |
| Efficiency | Up to 109% |
