EasyManua.ls Logo

Wolf FGB-K-35 User Manual

Wolf FGB-K-35
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GB
IE
Wolf GmbH / Postfach 1380 / D-84048 Mainburg / Tel. +49.0. 87 51 74- 0 / Fax +49.0.87 51 74- 16 00 / www.wolf.eu
Document no.: 3064458_201811 Subjecttotechnicalmodications
Installation and maintenance instructions for contractors
Wall mounted gas
condensing boiler
FGB wall mounted gas condensing boiler
FGB-K wall mounted gas condensing combi boiler
FGB-28
FGB-35
FGB-K-28
FGB-K-35
from FW 1.20

Questions and Answers:

Wolf FGB-K-35 Specifications

General IconGeneral
TypeTankless (instantaneous)
Fuel typeLiquefied Petroleum Gas (LPG), Natural gas
Control typeButtons
Boiler systemCombi boiler system
Product colorWhite
Heater locationIndoor
Placement supportedVertical
Solar batteries support-
Built-in displayYes
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)2 W
Power consumption (typical)114 W
Efficiency98 %
Maximum power35000 W
Minimum power6700 W
Maximum operating pressure3 bar
Domestic Hot Water (DHW) flow16.3 l/min
Weight and Dimensions IconWeight and Dimensions
Depth310 mm
Width408 mm
Height650 mm
Weight28000 g

Summary

Installation and Maintenance Instructions

Wall Mounted Gas Condensing Boiler

Main topic of the installation and maintenance manual for contractors.

FGB Gas Condensing Boiler Models

Details on the FGB and FGB-K models of the gas condensing boiler.

Comprehensive Safety Instructions

General Safety Precautions

Essential safety guidelines for installation, commissioning, and maintenance.

Specific Dangers and Risks

Highlights dangers from gas, flue gas, electrical components, scalding, and burns.

Dimensions and Technical Specifications

Detailed Technical Specifications

Comprehensive data on gas, water, performance, and efficiency parameters.

Installation Setup and Procedures

Positioning and Installation Clearances

Guidelines for boiler positioning, minimum clearances, and room requirements.

Gas Connection Procedures

Instructions for connecting the gas supply line, including safety checks.

Electrical Connection and Control Unit

General Electrical Installation Guidelines

Guidelines for electrical installation, including isolators and cable routing.

Parameter Configuration and Description

Gas Type and Combustion Checks

Gas Type Determination and Pressure

Information on gas types, Wobbe index, and required supply pressures.

Changing the Gas Type and CO2 Adjustment

Procedures for converting gas type and adjusting CO2 levels.

Checking Combustion Parameters

Steps for checking intake air and flue gas parameters for optimal combustion.

Technical Information and System Design

Safety Devices and Monitoring Functions

Description of safety devices like temperature limits and pressure monitoring.

Troubleshooting and Diagnostics

General Troubleshooting Approach

General guidance on operating safely and handling faults.

Fault Code Reference (01-05)

Detailed list of common fault codes, their causes, and remedies.

Fault Code Reference (06-24)

Detailed list of common fault codes, their causes, and remedies.

Fault Code Reference (27-107) and Key

Additional fault codes and explanation of abbreviations used.

Related product manuals