Regular Service and Maintenance
Throughout the life of the vehicle, usage will inevitably cause wear
of its mechanical parts. Regular maintenance will prolong the life of
the vehicle.
Requirements on Service and Maintenance
1. Keep the vehicle clean, make sure there are no fluid leaks
2. Confirm that the automatic clutch does not show any
indication of slipping on acceleration or that it makes any
abnormal noise. Also confirm that your throttle operates
smoothly and without binding.
3. Confirm that the brakes work well and meet necessary
stopping requirements. Also confirm that the wheels spin
freely once brakes are released and that there is no friction
noise when brakes are not on.
4. The front and rear shock absorbers should compress and
rebound smoothly and check for leaks around the seals. The
air pressure of the tire should be set to the required amount.
5. Check for loose electrical connections around the whole
vehicle.
6. The air pressure in the tires should be set to the required P.S.I.
7. All mechanical parts should be lubricated.
8. The cable connections to the battery terminals should be
clean and tight and the battery should be secured properly
within the vehicles battery box.
9. Any corrosion on any metal parts should be taken care of as
soon as possible to prevent spreading.
Service and Maintenance during the break-in Period
How a new vehicle is broken in directly affects the service life of
the vehicle. Within the first 500 miles of a new vehicle the driving
speed should not exceed 30 MPH, and the rider should vary your
speed regularly.
To Next Page
Loading...
