Adjustment of the rear braking light
* It is important to always check the vehicle lights and make
sure they are properly functioning prior to using the vehicle. The
brake light can be inspected with the ignition turned to the on
position, and the left brake handle pressed.
Adjustment of the idle speed
If the vehicle stalls out during normal operation due to the engine
speed being low, the idle speed can be adjusted:
* Before adjusting the idle, make sure the engine has reached
normal operating temperature.
* Place vehicle on the main stand. While the vehicle is running
adjust the idle until the specified value.
To gain access to the brake switches the left and right side
controls must be removed as well as the brake handles. This
can be performed at your local authorized service center.
Adjust the idle speed screw here. Turning clockwise will
raise the idle; counter clockwise will lower the idle.
Front braking light
switch
Rear braking light
switch
To Next Page
Loading...
