Vehicle operators must conduct regular service and maintenance of the environmental protection system to ensure the best
performance of the assembly. With proper and regular service and maintenance, we can promptly eliminate faults, prolong the
service life of the environmental protection system, reduce the maintenance costs, and realize the goal of being
environmental-friendly by reducing your vehicles fuel consumption.
Caution
The air pump of the environmental protection device must be serviced and
maintained by a professional motorcycle repair shop or the dealer’s
after-sales service personnel (make sure not to adjust the air pump without
authorization)
① Regularly check the clamp for the intake vacuum hose, the clamp for
the clean air feed, and the mounting bolt for the metal air pump intake
pipe. If they are loose, tighten them.
② Regularly check whether there is any aging, air leakage or damage on
the intake vacuum hose and the plastic clean air feed hose. If any,
replace damaged hose
③ Regularly check the working conditions of the air pump of the
environmental protection device. If it is blocked or is not working
properly, replace the air pump.
④ Regularly check the air filter. If any dust or dirt is found, the air flow
into the system will be reduced, thus changing the concentration of the
gas mixture in the exhaust. This will increase fuel consumption and
must be changed
To Next Page
Loading...
